b'Mixing AssembliesStandard Assembly (Two Arm) The L5M-A is supplied complete with a General Purpose Disintegrating Head, Square Hole High Shear Screen, Standard Emulsor Screen and Axial Flow Head. Slotted Disintegrating Heads, Fine Emulsor Screen, Pump Heads and other special heads are available as optional extras.Capacity - depending on viscosity - up to 12 litres. Mixing unit dimensions length 290mm (11 12), width 57mm (2 14).Tubular Mixing Assemblies A series of interchangeable tubular mixing units suitable for use in narrow-necked containers are available, with capacities from 1 - 500ml depending on viscosity, 1 tubular Capacity 50ml up to 500ml. 3/4 tubular Capacity 20ml up to 250ml.5/8 micro Capacity 5ml up to 50ml.3/8 mini-micro Capacity 1ml up to 10ml. Duplex AssemblyThe Duplex comprises two workheads facing in opposite directions. The upper head pulls materials down from the surface of the mix, and provides a coarse disintegrating action, while the lower head draws material up from the base of the mixing container, further reducing particle sizeto accelerate solubilisation or suspension.This combined use of two workheads makes the Duplex ideal for high viscosity mixes and applications where light or buoyant material (powders, rubbers and polymers, etc.) need to be drawn down from the surface of a mix and rapidly dispersed.Ultramix The Silverson Ultramix is designed for applications that are beyond the capabilities of a conventional agitator or stirrer but do not necessarily require the intense high shear of a Silverson rotor/stator mixer.Silverson.com 10'